Table of Contents
Advertisement
Perform the steps in
arrive at the above module configuration.
Recommended Module Layout for M9391A VSA
The following is the recommended module layout for multiple M9391A PXIe VSAs
in two chassis. The diagram below shows the layout of both the first and the
second chassis.
Perform the steps in
arrive at the above module configuration.
Cable and Connector Care
Use the Keysight Cable Removal Tool to disconnect push-on cables from the
module front panel connectors.
Keysight M9391A PXIe Signal Analyzer & M9381A PXIe Vector Signal Generator 1 MHz to 3 GHz or 6 GHz
Procedure for Configuring PXIe Backplane Bus Triggers
Procedure for Configuring PXIe Backplane Bus Triggers
In the Shared LO configurations, there is an additional External Trigger line
radiating out from the shared Synthesizer (Slave 1's Synthesizer) as shown
below:
1 ← 2 → 3.
to
to
74
Advertisement
Table of Contents
