M9300A Pxie Frequency Reference Front Panel Features - Keysight Technologies M9300A Startup Manual

M9300A PXIe Frequency Reference Front Panel Features

Connector
100 MHz BP
Out
100 MHz
Out 1
through Out
5
Trig 1
Trig 2
Sync
10 MHz Out This SMB male connector provides a 10 MHz signal. This output is
OCXO Out
Ref In
Keysight M9300A PXIe Frequency Reference Startup Guide
Description
This SMB male connector outputs a 100 MHz signal from the chassis
backplane board. This output is enabled through the SFP.
Each of these SMB male connectors may output a 100 MHz reference
and clock signal to the 100 MHz In connector of the Keysight M9301A
PXIe Synthesizer.
This connector is intended for future use.
This connector provides a programmable output trigger.
This connector is intended for future use.
enabled through the SFP.
This SMB male connector provides a 10 MHz signal from the 10 MHz
OCXO timebase. This output is enabled through the SFP.
This SMB male connector inputs a 1 MHz to 110 MHz reference signal.
The connector is AC coupled and terminated into 50 Ω.
Step 4: Install the Module
23