Using The Smart Ink Dynamic (Floating) Toolbar; Changing A Pen's Default Color, Thickness, And Other Properties; Erasing Digital Ink - SMART Board 6000S Series User Manual

Chapter 2
Using basic features
TIP
To learn how to change a pen's default behavior, see Changing a pen's default color, thickness, and
l
other properties below.
Before writing or drawing over a video, an animation, or other moving images, freeze the screen (see
l
Freezing the screen on page 28).

Using the SMART Ink dynamic (floating) toolbar

If you pick up a pen while viewing a connected computer's input, the SMART
Ink® dynamic (floating) toolbar for SMART Ink appears on the screen. You can
use this toolbar to temporarily change the pen's color, thickness, or other
properties, and you can also access SMART Ink's tools, such as screen capture,
spotlight, screen shade, and so on.
To learn more about SMART Ink and its toolbar, visit the
page. Here are a few quick links to get you started:
Turning SMART Ink on or off
l
Opening the dynamic (floating) toolbar
l
Closing (hiding) the toolbar
l
Using SMART Ink presentation tools
l

Changing a pen's default color, thickness, and other properties

You can change a pen's color, thickness, and other properties temporarily using the SMART Ink dynamic
(floating) toolbar when you're viewing a connected computer's input.
See Using the SMART Ink dynamic (floating) toolbar above.
NOTE
The pen's color, thickness, and other properties will return to their default settings once the pen is
returned to the display's magnetic pen well.

Erasing digital ink

CAUTION
When you return an eraser to a magnetic holder, make sure it's centered in its holder to keep it from falling
and being damaged.
smarttech.com/kb/171415
SMART Ink support
26