Using The Home Button - SMART Board 6000S Series User Manual

Chapter 2
Using basic features
If the display is in Ready mode, you can turn it on in a number of ways:
Press the Power button
l
Tap the Home button below the screen.
l
NOTE
The Home button is illuminated when the display is in Ready mode.
Press the Home button
l
Pick up a pen or the eraser.
l
If the display is on, it will return to an energy saving mode when one of the following occurs:
The sensor detects no motion in the room for the length of time configured in the display's settings.
l
You press the Power button
l
After entering Ready mode, the display enters an energy saving mode when the sensor doesn't detect
anyone in the room for the length of time configured in the display's settings.
For information about turning off the display, see the SMART Board 6000S and 6000S Pro series interactive
displays installation and maintenance guide (smarttech.com/kb/171414).

Using the Home button

You can use the Home screen to open and use iQ apps, view the input of connected computers, and more.
You can also change the background and personalize other features of the Home screen. To learn more
about the Home screen, see
The Input screen shows thumbnails of connected computers and allows you to switch among inputs.
You can return to the Home screen or the Input screen at any time by following the instructions below.
To show the Home screen or the Input screen
Tap the Home button
OR
Press the Home button
smarttech.com/kb/171415
on the convenience panel.
on the remote control.
on the convenience panel or the remote control.
Understanding the Home
below the screen.
on the remote control.
screen.
19