Attaching The Wrist Strap - Sun Microsystems Ultra 1 Series Service Manual

3. Grasp the sides of the cover and lift up the back of the cover. After the cover
clears the back panel, push the cover away from the front panel.
Figure 7–2

Attaching the Wrist Strap

1. Unwrap the first two folds of the wrist strap and wrap the adhesive side firmly
against your wrist.
See Figure 7–3.
2. Peel the liner from the copper foil at the opposite end of the wrist strap and
attach the copper end of the wrist strap to the top of the power supply.
Sun Ultra 1 Series Service Manual ♦ Revision A, November 1995
36
Removing the Cover