Vacon NXP/C 5 Series User Manual page 73

72 • vacon
Applications (S6.8.4)
At location S6.8.4 you can find the
application currently in use but also all other applications loaded into the frequency converter. The
information available is:
Page
Name of application
6.8.4.#
6.8.4.#.1 Application ID
6.8.4.#.2 Version
6.8.4.#.3 Firmware interface
Table 8-9. Applications information pages
I/O term
Applications
A1
Figure 8-25. Applications info page
Applications
In the
which there are as many as there are applications loaded into the frequency converter. Locate the
application you want information about with the
pages Menu button right
with the
Hardware (S6.8.5)
The Hardware information page provides information on the following hardware-related topics:
Page
6.8.5.1 Nominal power of the unit
6.8.5.2 Nominal voltage of the unit
6.8.5.3 Brake chopper
6.8.5.4 Brake resistor
Table 8-10. Hardware information pages
Expander boards (S6.8.6)
In the Expander boards
the control board (see Chapter 7.2).
You can check the status of each board slot by entering the
button right and using the
Menu button right
Push the
program version of the respective board when you push either one of the
If no board is connected to the slot the text
but the connection is somehow lost the text
and 6-16 for more information.
8
Applications submenu
Content
READY
Basic
A7
information page, push the
. Use again the
Content
pages you find information about the basic and option boards connected to
Browser buttons
again to display the status of the board. The keypad will also display the
containing information about not only the
I/Oterm
Standard
D1 D3
READY
I/O term
D3
D1
Menu button right
Browser buttons
Browser buttons
Expander boards
to choose the board whose status you wish to check.
'no board' will be shown. If a board is connected to a slot
'no conn.'
is displayed. See Chapter 7.2 and Figure 7-1
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
CONTROL KEYPAD
I/Oterm
Version
2.01
READY
I/Oterm
Application id
NXFIFF01
to enter the Application pages of
and then enter the Information
to see the different pages.
page with the
Browser buttons
Menu
.