Vacon NXP/C 5 Series User Manual page 28

CABLING AND CONNECTIONS
Connect mains cables to
terminals L1, L2 and L3 on
the input device (if used)
or to power terminals on
the converter using cable
lugs
Connect the PE conductor
to the PE bar
Figure 6-3. Routing of power cables, bottom cabling, frames FR10-FR12.
Connect mains cables to
power terminals on the
converter
Connect the PE conductor
to the PE bar
Figure 6-4. Routing of power cables, bottom cabling, frame FR13
24-hour support: +358 (0)40 837 1150 • Email: vacon@vacon.com
Connect motor cables to
terminals U, V and W on
converter using cable lugs
Strip 2
Strip 1
Earthing clamp for motor
cable screen
Connect the PE
conductors to the PE bar
Connect motor cables to
terminals U, V and W on
converter
Connect the PE
conductors to the PE bar
ud1011k9.fh8
vacon • 27
PE
6