Vacon NXP/C 5 Series User Manual page 63

62 • vacon
System Menu
Application
Standard
Figure 8-10. Change of application
8.3.6.3 Copy parameters
The parameter copy function is used when the operator wants to copy one or all parameter groups
from one drive to another or to store parameter sets in the internal memory of the converter. All the
parameter groups are first
and then the parameter groups are
Before any parameters can successfully be copied from one drive to another the drive has to be
stopped when the parameters are downloaded to it:
The parameter copy menu (S6.3) embodies four functions:
Parameter sets (S6.3.1)
The Vacon NX frequency converter features a possibility for the user to load back the factory default
parameter values and to store and load two customised parameter sets (all parameters included in
the application).
Parameter sets
On
LoadFactDef
begins to blink and you can confirm the loading of factory defaults by pushing the
button
. The drive resets automatically.
Alternatively you can choose any other of the storing or loading functions with the
Confirm with the
8
STOP READY
I/Oterm
S1 S11
STOP READY
I/Oterm
uploaded
to the keypad, then the keypad is connected to another drive
downloaded
page (S6.3.1), push the
Enter button
. Wait until 'OK' appears on the display.
I/Oterm
Application
Standard
I/Oterm
Application
enter
Multi-step
to it (or possibly back to the same drive).
Menu button right
to enter the
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
CONTROL KEYPAD
STOP READY
STOP READY
Edit menu
. The text
Browser buttons
Enter
.