Vacon NXP/C 5 Series User Manual page 67

66 • vacon
Parameter lock (P6.5.2)
This function allows the user to prohibit changes to the parameters.
If the parameter lock is activated the text
parameter value.
NOTE: This function does not prevent unauthorised editing of parameter values.
Enter the edit mode by pushing the
parameter lock status. Accept the change with the
Menu button left
the
READY
I/Oterm
System Menu
S1 S9
READY
I/Oterm
Parameter Lock
ChangeEnable
Figure 8-15. Parameter locking
Start-up Wizard (P6.5.3)
The Start-up Wizard is a feature on the control keypad to facilitate the commissioning of the fre-
quency converter. If selected active (default), the Start-up Wizard prompts the operator for the lan-
guage and application of his/her choice plus for the values for a set of parameters common to all
applications as well as for a set of application-dependent parameters.
Always accept the value with the
buttons
(up and down arrows).
Set the Start-up Wizard active in the following way: In the System Menu, find page P6.5.3. Press the
Menu button right
confirm the selection with the
procedure and give the parameter value
READY
READY
I/O term I/O term
Startup wizard Startup wizard
No
No
Figure 8-16. Activation of Start-up wizard
8
*locked*
Menu button
.
Security
Parameter Lock
enter
ChangeDisabl
Enter button
once to reach the edit mode. Use the
Enter button
No
I/Oterm I/Oterm
Startup wizard Startup wizard
No
No
will appear on the display if you try to edit a
right. Use the Browser buttons
Enter button
or return to the previous level with
READY
I/Oterm
P1 P4
READY
I/Oterm
, scroll options or change values with the
Browser buttons
. If you want to deactivate the function follow the same
.
READY
READY
I/Oterm
Startup wizard Startup wizard
Yes
Yes
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
CONTROL KEYPAD
to change the
READY
I/Oterm
Parameter Lock
ChangeEnable
Browser
Yes
to set value and
READY
READY
I/Oterm
enter
enter
CONFIRM CONFIRM
CANCEL
CANCEL