Vacon NXP/C 5 Series User Manual page 68

CONTROL KEYPAD
Multimonitoring items (P6.5.4)
Vacon alpha-numeric keypad features a display where you can monitor even three actual values at
the same time (see chapter 8.3.1 and chapter
are using). On page P6.5.4 of the System Menu you can define if it is possible for the operator to
replace the values monitored with other values. See below.
READY
I/Oterm
Multimon. items
ChangeEnable
Figure 8-17. Enabling the change of multimonitoring items
8.3.6.6 Keypad settings
In the Keypad settings submenu under the
converter operator interface.
Locate the Keypad settings submenu (S6.6). Under the submenu, there are four pages (P#)
associated with the keypad operation:
Keypad settings
Figure 8-18. Keypad settings submenu
Default page (P6.6.1)
Here you can set the location (page) to which the display automatically moves as the
(see below) has expired or as the power is switched on to the keypad.
Default Page
If the value is 0 the function is not activated, i.e. the last displayed page remains on the
keypad display. Press the
Browser buttons
Main menu with the
edit the number of the submenu/page. If the page you want to move to by default is at the third level
repeat the procedure. Confirm the new default page value with the
the previous step anytime by pushing the
READY
I/Oterm
Default page
0.
Figure 8-19. Default page function
24-hour support: +358 (0)40 837 1150 • Email: vacon@vacon.com
Monitoring values
I/Oterm
Multimon. items
ChangeEnable
System menu
READY
I/O term
P1 P5
Menu button right once to enter the edit mode. Change the number of the
. Pressing the
Menu button left
READY
I/Oterm
Default page
0.
in the manual of the application you
READY
enter
you can further customise your frequency
READY
I/Oterm
Default page
0.
Menu button right
once again makes you able to
Enter button
.
READY
I/Oterm
Default page
1.
vacon • 67
READY
I/Oterm
Multimon. items
ChangeDisable
Timeout time
. You can return to
enter
CONFIRM CHANGE
REPEAT TO SET
DEFAULT SUBMENU/PAGE
CANCEL
8