Vacon NXP/C 5 Series User Manual page 72

CONTROL KEYPAD
Trip counters (S6.8.2)
Trip counters (menu S6.8.2) are counters the values of which can be reset i.e. restored to zero. You
have the following resettable counters at your disposal. See Table 8-6 for examples.
Note! The trip counters run only when the motor is running.
Page Counter
T6.8.2.1 MWh counter
T6.8.2.3 Operation day counter
T6.8.2.4 Operation hour counter
Table 8-7. Resettable counters
The counters can be reset on pages 6.8.2.2
counter)
.
Example: When you want to reset the operation counters you should do the following:
STOP READY
Trip counters
T1 T5
STOP READY
Clr Optime cntr
Reset
Figure 8-24. Counter reset
Software (S6.8.3)
The Software information page includes information on the following frequency converter software
related topics:
Page
6.8.3.1 Software package
6.8.3.2 System software version
6.8.3.3 Firmware interface
6.8.3.4 System load
Table 8-8. Software information pages
24-hour support: +358 (0)40 837 1150 • Email: vacon@vacon.com
(Clear MWh counter)
STOP READY
Clr Optime cntr
Not reset
STOP READY
Clr Optime cntr
enter
Reset
Content
vacon • 71
(Clear Operation time
and 6.8.2.5
READY
Clr Optime cntr
Not reset
STOP READY
Clr Optime cntr
Not reset
8