Vacon NXP/C 5 Series User Manual page 27

26 • vacon
Note: The EMC requirements are fulfilled at factory defaults of switching frequencies (all frames).
6
Cable type
(2
Mains cable
Motor cable
Control cable
Table 6-1. Cable types required to meet standards
Level L = EN61800-3, 2
Level T = For IT networks
Level N = No EMC emission requirements fulfilled
1 = Power cable intended for fixed installation and the specific mains
voltage. Shielded cable not required (DRAKA NK CABLES - MCMK or
similar recommended)
2 = Symmetrical power cable equipped with concentric protection wire and
intended for the specific mains voltage (DRAKA NK CABLES - MCMK or
similar recommended).
4 = Screened cable equipped with compact low-impedance shield (DRAKA
NKCABLES - JAMAK, SAB/ÖZCuY-O or similar).
Level L Level T Level N
nd
environment)
1 1
2 1/2*
4 4
nd
environment
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
CABLING AND CONNECTIONS
1
1/2*
4
*Recommended