Vacon NXP/C 5 Series User Manual page 64

CONTROL KEYPAD
Parameter sets
Select
Parameter sets
Wait...
Figure 8-11. Storing and loading of parameter sets
Upload parameters to keypad (To keypad, S6.3.2)
This function uploads all existing parameter groups to the keypad provided that the drive is stopped.
To keypad
Enter the page (S6.3.2) from the
enter the edit mode. Use the
Enter button
. Wait until 'OK' appears on the display.
READY
Copy Parameters
P1 P4
READY
Up to keypad
Wait...
Figure 8-12. Parameter copy to keypad
Download parameters to drive (From keypad, S6.3.3)
This function downloads one or all parameter groups uploaded to the keypad to a drive provided
that the drive is in STOP status.
Enter the From keypad
enter the edit mode. Use the
Application parameters
The procedure to download the parameters from keypad to drive is similar to that of from drive to
keypad. See above.
24-hour support: +358 (0)40 837 1150 • Email: vacon@vacon.com
READY
READY
Parameter copy menu
Browser buttons to select the option
READY
Up to keypad
Select
READY
Up to keypad
OK
page (S6.3.3) from the Parameter copy menu
Browser buttons
to select either the option
Enter button
and press the
READY
Parameter sets
LoadFactDef
READY
Parameter sets
OK
. Push the
All parameters
Up to keypad
All param.
. Push the
. Wait until 'OK' appears on the display.
vacon • 63
enter
CONFIRM
CANCEL
Menu button right
to
and press the
READY
CONFIRM
enter
CHANGE VALUE
CANCEL
Menu button right
All parameters
or
to
8