Table of Contents
Advertisement
Chapter 4
Operation
Overview
Up to 32 Desire XTI fixtures can be daisy-chained on a DMX/RDM network. Each fixture can have an
unique DMX address and each address can be configured separately. Also, more that one fixture can
have the same address, allowing you to configure them identically.
You can use an RDM configuration tool or an RDM lighting control device to configure the fixtures. An
RDM configuration tool is installed on a PC, which is connected to the DMX/RDM network via
Gadget II or a DMX/RDM gateway. After the fixtures are configured, Gadget II or the gateway can be
disconnected and a DMX or RDM control device can be connected to the network for continued
operation.
Gadget II
See
on
Gadget II
Figure-4.1 Architecture of a Desire XTI fixture network.
Operation
page 28
DMX/RDM Gateway
or
Or
Junction
box
Junction
box
Junction
box
Up to 32 fixtures
page 29
on
.
Computer with Net3 Concert
or UpdaterAtor
DMX/RDM
gateway
Console
Desire fixture
Desire fixture
Desire fixture
27
Advertisement
Table of Contents
