Edp Network Connection - KaVo Everest scan Base Camp Instructions For Use Manual

Instructions for use Everest scan pro, Everest scan eco, Everest scan Base Camp | Typ 4101, 4102
|
4 Commissioning 4.2 Connection
4.2.2 4102

4.2.3 EDP network connection

▶ If you want to connect a single KaVo Everest Scan without network connection
up to a KaVo Everest engine, attach an RJ 45 (cross-over) network cable to the
NET port at the rear of the PC.
▶ If there is a network, connect up the PC with network cables as per usual.
Optional connection to Everest Design Sherpa
When an Everest Design Sherpa is used, it centrally manages all orders and master
data.
The scan PC only sends the scan data to the Everest Design Sherpa to enable
simultaneously scanning and construction.
See also: To calculate an Everest Design Sherpa, follow the special installation
instructions for the Everest Design Sherpa.
22/30