Table of Contents
Advertisement
EWL 70, 120.
A 5 Mounting and connection
A 5.1 Assembly of the rinsing panel
on leg rack
Place the leg rack at the envisaged point of
installation.
Place the rinsing panel on the leg rack and
the align the back sides.
Negligible lateral displacements are
permissible, but these must not
impair the cable lead-in or connections.
Fix the rinsing panel to the table stand with
the 4 screws @.
Ensure that there is a free side space
of at least 5 mm from the wall for the
installation of the fume cupboard. Possible
wall unevenness must be taken into
account.
Level the rinsing panel by means of
adjusting screws ".
A 5.2 Assembly of the rinsing panel
on wall brackets
Fix the brackets # to the wall with screws,
as shown in the drawing, and level.
Check for possible cables and pipes
in the wall before the brackets are
mounted.
Place the rinsing panel on the brackets and
fasten with the 4 screws £
Ensure that there is a free side space
of at least 5 mm from the wall for the
installation of the fume cupboard. Possible
wall unevenness must be taken into
account.
1
5
2
3
4
Advertisement
Table of Contents
