Pairing Another Rf Remote - Screen Innovations Solo Installation Instructions Manual

DO NOT set the lower limit (top of viewing) more
than MAX DROP from the cassette. Doing so risks
damaging the screen material.
4. Once the viewing area is positioned, hold the middle
square STOP button until the screen jogs once. This
saves the new lower limit. If this Step is not
completed, the screen will jog once after about 3
minutes, indicating that its no longer in program
mode, and the motor will only recall the previous
lower limit. No changes will be saved.
1" Factory default drop
AC(110v) RTS - Programming
Drop - Can be set up to
MAX DROP
18

PAIRING ANOTHER RF REMOTE

USING ORIGINAL REMOTE
If another remote was purchased, it will not come
paired to your screen motor. To pair it, first take the
working remote supplied with the Solo/Pro 2 and press
the Program button on the back of the remote until
the screen jogs once. Holding the new remote, briefly
press* the Program button on the back. The screen
will jog once. The new remote is now paired with the
screen.
Long Press
Original Remote
*A brief press is about ½ second long. Too short or too long of
a button press may not perform the desired operation.
Pairing another RF remote
Brief Press
New Remote
19