Pairing Second Rf Remote; Storage And Transport - Screen Innovations Solo Installation Instructions Manual

PAIRING SECOND RF REMOTE

To pair a second remote, first take the original remote
supplied with the Solo and press the Program button
on the back of the remote until the screen jogs once.
Then, briefly press* the program button on the back
of the new remote. The screen will jog once. The new
remote is now paired with the screen.
PROGRAM
BUTTON
*A brief press is about ½ second long. Too short or too long of
a button press may not perform the desired operation.
Pairing second RF Remote

STORAGE AND TRANSPORT

Before storing or transporting, deactivate the motor by
putting it in sleep mode, to make sure the screen does
not deploy and get damaged.
Putting The Motor To Sleep
the button on the back of the remote until the screen
jogs once. Press and hold the UP, STOP, and DOWN
buttons at the same time until the screen jogs again.
The motor is now asleep. To wake up the screen, see
the steps outlined in the START UP (page 11).
15 Storage and Transport
- Use a thin tool to hold
thin tool
Designed in Austin TX
16