Screen Innovations Solo Installation Instructions Manual page 7

2. Determine the desired horizontal viewing position
centerline of the projected viewing area.
3. The Solo/Pro 2 screen must be installed with the
brackets no more than 4 inches from each end of
the cassette. Measure the overall length of the
cassette to determine the min. and max. horizontal
spacing of the mounts. Mark the location of the
brackets over a stud or ceiling joist and within an
appropriate distance from the ends. If the location
of the stud or ceiling joist does not allow the center
of the screen to match the projector lens' center,
another board or plate will have to be installed on the
wall or ceiling to take the mount fasteners.
Solo/Pro 2 - Installation
wire
exits back
corner
of the
cassette
pull wire
through the
hole in gray
8 Solo/Pro 2 - Installation
Cassette Length
1" Min to 4" Max
zone
View Width
Screen Centerline
Brackets secured to Wall or
Ceiling Structural Supports
Structural Supports
9