Motor Accessories Ac(110V) 485; Storage And Transport - Screen Innovations Solo Installation Instructions Manual

MOTOR ACCESSORIES -
AC(110v) 485
(purchased separately)
SOMFY Data Hub
1870262
Data Hub
BACK
PRESET 1
PRESET 2
PRESET 3
Limit Setting Tool
STOP
Decoflex Wall Switch
Motor Accessories - AC(110v) 485
Bus Power
Supply
Bus Power Supply
OK
OPEN
STOP
LIGHT
CLOSE
485
0 1 2
SIFI

STORAGE AND TRANSPORT

Before storing or transporting Solo/Pro 2, make sure the
screen is fully retracted. Disconnect the motor power
supply and any control wiring to make sure the screen
does not deploy. Failing to do so may damage the screen.
Make sure to put the shipping locks back on.
It is preferred to store or transport your Solo/Pro 2
horizontally. Shock and vibration experienced during
transportation may shift the screen material and cause
slight wrinkles. Follow the steps below to remove the
wrinkles in most cassettes by manually redistributing the
material:
1. Bump the bottom of the weight bar up several
times along it.
2. Use 2 fingers to pinch the material just above the
middle of the weight bar and lightly pull on the
material to smooth out any wrinkles at the weight
bar.
34 Storage and Transport 35