Initial Consideration - Screen Innovations Solo Installation Instructions Manual

CONTENTS (cont.)
Mounting Accessories ............................................ Pg 32
Motor Accessories AC(110v) RTS .........................Pg 33
Motor Accessories AC(110v) 485......................... Pg 34
Storage and Transport ........................................... Pg 35 - 36
Care and Maintenance ........................................... Pg 37
Troubleshooting ........................................................ Pg 38 - 41
Warranty
..................................................................... Pg 42
INITIAL CONSIDERATIONS
Thank you for your purchase of Solo/Pro 2. The screen
is mountable outdoors, but is not waterproof. It has not
been designed to be run or left in the rain or condensing
humidity. Also avoid water spray, splash and extreme
heat or cold. Protect your Solo/Pro 2. and you can expect
years of quality use.
For a quick install it is recommended you run appropriate
wire to the installation location before installing the
screen. See the Pre-Wire sections for details.
Follow all local electrical codes when running and
terminating AC(110v) wires. It is the responsibility of the
installer to make sure AC(110v) screens are installed to
electrical safety codes.
The Short Throw material is not 100% opaque.
Light sources behind the screen may be visible in
the viewing surface.
Initial Considerations 1