Spacer Blocks And Leveling Shims; Pre-Wire - Ac(110V) 485 - Screen Innovations Solo Installation Instructions Manual

SPACER BLOCKS & LEVELING
SHIMS
Spacer Blocks are used to
clear an obstruction on the
wall. Connect spacer block
to each wall bracket before
installation.
Spacer Blocks & Leveling Shims
Leveling Shims are used if
the ceiling or other
mounting surface is out
of level or plumb. Connect
to ceiling brackets before
installation.
4

PRE-WIRE - AC(110v) 485

1. Run 3 conductor wire to the left side of screen
cassette installation location (refer to pg. 9). To be
sure you have the correct wire you can order 485
wire directly from SI.
2. Terminate the wires with the provided terminal block
as shown below.
Pre-Wire - AC(110v) RTS
Not Used
Data + +
Data - -
Data ground G
5