2. ADD PAPER SYMBOL (Cont.)
Adding Paper to the Large-Capacity Feeder (optional)
1
Open the cover of the large-capacity feeder (optional).
1
2
3
4
If you want to add paper because the paper supply has be-
come low, press the TRAY DOWN key before opening the
cover. The elevator tray will automatically move down and
stop.
5
6
2
Place paper in the large-capacity feeder.
- Maximum number of sheets that can be set
- Fan the sheets well and make sure that all of them are
placed neatly aligned against the guide plates at the rear side
7
on the elevator tray. It may cause image skewing if a gap is
left between the set paper and the guide plates at the rear
side.
- Do not add paper above the line indicated on the guide.
8
- Do not use creased, folded, wrinkled or damp sheets of pa-
per.
3
Close the cover of the large-capacity feeder (op-
9
tional).
- Close the cover completely. The elevator tray automatically
moves up to the paper feeding position.
10
11
12
9-4
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
Page 2-4
TRAY DOWN key
Guide plate at
rear side
Elevator tray