Book Centre Erase - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

3. BOOK CENTRE ERASE

This function allows you to erase the shadow in the centre of a book original.
1 Place paper in the cassette(s).
- When using this mode in bypass copying (
sure to specify the paper size.
2
Place the original(s).
3 Press the EDIT key to enter the editing menu, and
press the BOOK CENTER ERASE key.
- If the key for the desired function is not shown, press the
Next key to switch the screen.
4
Adjust the width of the book centre erase margin,
then press the SET key.
- The default width of the book centre erase margin is 10
mm.
- To adjust the width, press the
select the desired number.
Select other copy modes as required.
5 Press the START key.
After the book centre has been erased
Page 2-4
Page 6-5), be
Page 2-9
2mm or 50mm key and
Before
1
2
3
4
5
6
7
8
9
10
11
12
5-5