Adding Paper To The Large-Capacity Feeder (Optional) - Toshiba e-studio 45 Operator's Manual

2. ADD PAPER SYMBOL (Cont.)

Adding Paper to the Large-Capacity Feeder (optional)

1 Pulling up the grip, draw out the large-capacity
1
feeder carefully until it comes to a stop.
2
3
2
Open some paper packages, take out entire reams
of paper and set them aligned in tray
4
• When setting the paper, set the paper for
aside, and set it for
set neatly if you pile up the paper little by little alternately in
the tray
5
(Refer to the labels attached in the large-capacity feeder).
• Do not add paper above the line indicated on the guide.
• Up to 2500 sheets of paper (recommended by Toshiba) can
be set.
6
• Paper starts being fed from the elevator tray
when it runs out of paper, the paper on tray
position
• Do not use creased, folded, wrinkled or damp sheets of
7 paper.
3
Close the cover of the large-capacity feeder.
• Close the cover completely. The elevator tray automatically
moves up to the paper feeding position.
8
9
10
11
12
7-4
WHEN GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
to the left aside. (The paper can be
and .) Be sure that the center lever is not open
.
and tray .
to the right
at first, and
moves to the
A
B