Toshiba E-STUDIO 210C Operator's Manual For Copying Functions page 105

4 Press the desired Memory Number key.
- The copy modes are stored in the selected Memory Number
key.
- Memory Number keys where copy modes have been already
stored are shown in a half-tone shaded pattern.
- The stored copy modes remain unchanged until different
copy modes are entered. (They are retained even after the
power switch is turned off.)
Recalling a Stored Combination of Copy Modes to Make Copies
1 Place paper in the cassette(s).
2 Place the original(s).
3 Press the PROGRAM key to enter the programme
menu, and press the MODE MEMORY key.
4 Press the RECALL key.
5 Press the Memory Number key where the desired
combination of copy modes are stored.
- Memory Number keys where copy modes have been already
stored are shown in a half-tone shaded pattern.
6
Press the START key.
- Copies will be made in the recalled copy modes.
Page 2-4
Page 2-9
1
2
3
4
5
6
7
8
9
10
11
12
6-13