Bypass Copying On Non-Standard Size Paper - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

3. BYPASS COPYING (Cont.)

Bypass Copying on Non-standard Size Paper

The size of non-standard paper is within the following ranges:
1
Length: 100 ~ 305mm
2
1
Perform steps 1 to 3 on page 6-7.
2 Press the NON-STANDARD key.
3
4
5
3
Key in each dimension (length and width) with the
digital keys, or recall the data stored in the MEMORY.
Then press the lower SET key.
6
- When using the digital keys to key in the size:
Key in the length with the digital keys and press the upper
SET key. Simlarly, set the value for the width.
7
8
- Press the MEMORY 1 ( MEMORY 2 , MEMORY 3 or
9
MEMORY 4 ) key and the paper size memorized in the
MEMORY 1 appears.
- Storing a non-standard size in the memory
10
11
Select other copy modes as required.
4 Press the
12
6-8
USING THE SPECIAL FUNCTIONS
Width: 148 ~ 457mm
START key.
Page 6-5 (table)
Page 6-9