Setting The Off-Mode (Auto Shutoff) - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

14. SETTING THE OFF-MODE (AUTO SHUTOFF)

This function allows the copier to automatically turn its power OFF when it is left inactive for a specified
1
period of time. When the power is supplied to the optional printer controller, the copier will go into the sleep
mode and it will stand by with the minimum power consumption.
2
1 Press the PROGRAM key to enter the programme
menu, and press the AUTO SHUT OFF key.
3
- If the key for the desired function is not shown, press the
Next key to switch the screen.
4
5
2 Select the period of time (in minutes) on the dis-
play allowed before the Off-mode (the Sleep mode
if the power is being supplied to the optional printer
controller) is activated.
6
- The setting procedure finishes and the display returns to the
programme menu screen.
- The default setting is 'OFF'.
7
If you do not want to use the off-mode, select the OFF key.
8
Clearing the Off-Mode/Sleep Mode
Turn ON the power switch once again when the copier is in the
9
off-mode. Press the
copier starts to warm itself up.
10
11
12
6-32
USING THE SPECIAL FUNCTIONS
START key during the sleep mode. The