Reduction And Enlargement Copying - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

Digital colour plain paper copier
Hide thumbs Also See for E-STUDIO 210C:
Table of Contents

Advertisement

2. REDUCTION AND ENLARGEMENT COPYING

There are the following three ways of making copies in the reduction and enlargement mode:
1
• Using Automatic Magnification Selection (AMS)
• Specifying both original size and copy size
• Using the reduction/enlargement zoom keys or the one-touch zoom keys
* It is not possible for the device to perform Automatic Magnification Selection with highly transparent
2
originals such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or
irregular sized originals such as newspapers and magazines. For these types of originals, use the other
reduction/enlargement modes.
Original sizes for which Automatic Magnificaton Selection (automatic detection) is available
3
2-9
* Set the paper size for "the OTHER" key as required (
a non-standard size other than A3, A4, B4 or A5, you will select the OTHER key on the screen of step
3 below. Before pressing it, you need to make the OTHER key recognize the same size as the originals
or paper that have been set.
4
Automatic Magnification Selection (AMS)
5
1
Place paper in the cassette(s).
2
Press the desired cassette, then the ZOOM··· key.
6
- The copy paper size is selectable on the screen in step 3 as
well.
7
8
3
Press the AMS key.
- OTHER key
9
4
Place the original(s).
- The built-in sensors automatically detect the size of the
original(s) and compute the reproduction ratio using the speci-
fied paper size.
10
- If the following messages are shown, proceed as directed:
Change direction of original
11
Use reduced-size cassette
Select other copy modes as required.
12
5
Press the
3-4
SETTING OF BASIC COPY MODES
Page 6-15
Page 2-9
START key.
Page 6-15). When the set originals or paper are
Page 2-4
Page

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 310c

Table of Contents