Daily Inspection - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

1. DAILY INSPECTION

1
Power switch ON/OFF status
We recommend turning the power switch ON at the startup everyday so that copies can be made when-
ever you want. Also, be sure to turn the power switch OFF when you leave the office. In the following
2
cases, do not turn the power switch OFF.
- when the off-mode (or sleep mode) is set;
- when the weekly timer is in use;
- when the power is supplied to the optional printer controller.
3
4
To maintain copy quality, the following items are recommended to be cleaned preferably once a week.
* Be careful not to scratch the parts that you are cleaning.
5
If the original glass of the copier is dirty, the stains may be copied.
- Clean the original glass with a cloth moistened with
6
a small amount of water or cleaning liquid, then
wipe a dry cloth over the glass.
7
8
9
If the back face of the original cover is dirty, the copy may get dirty or the original size may be incorrectly
detected.
10
- Clean the original cover with a cloth moistened with
a small amount of water, alcohol or a neutral deter-
gent, then wipe off the detergent completely with a
dry cloth.
11
12
10-2
MAINTENANCE
Items for Daily Check
Weekly Maintenance
Cleaning the Original Glass
Cleaning the Original Cover