Edge Erase - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

2. EDGE ERASE

If your original has a dirty or torn edge, it may be reproduced as a black stain on the copy. In that case,
1
use Edge Erase Copying. A white border is created along the edges of the copy, eliminating those black
stains.
2
3
4
1
Place paper in the cassette(s).
- When using this mode in bypass copying (
5
sure to specify the paper size.
2
Place the original(s).
6
3 Press the EDIT key to enter the editing menu, and
press the EDGE ERASE key.
7
8
4
Adjust the width of the white border, then press the
9
SET key.
- The default width of the white border is 5 mm.
- To adjust the width, press the
select the desired number, then press the SET key.
10
11
Select other copy modes as required.
5
Press the
12
5-4
USING THE EDITING FUNCTIONS
Page 2-9
2mm or 20mm
START key.
Page 2-4
Page 6-5), be
key to