General Copying Procedures - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

Digital colour plain paper copier
Hide thumbs Also See for E-STUDIO 210C:
Table of Contents

Advertisement

1. GENERAL COPYING PROCEDURES

1
After setting (confirming) paper in the cassettes, place the originals. When the
with any settings unchanged, copies are made in the initial (default) settings (*1). You can make copies
as desired by setting different copy modes.
2
The initial (default) settings of the copier at the time of installa-
tion are as shown on the right.
*1 The copy modes that are automatically set when the power
3
is turned on, when the energy-saving mode is cleared or
when the
control panel are called the initial (default) settings.
*2 This is displayed when the reversing automatic document
feeder (optional) is installed.
4
5
1
Place paper in the cassette(s).
- Acceptable copy paper
6
When the desired paper is not set in any of the cassettes or the
large-capacity feeder (optional):
- Setting the cassette
7
- Bypass copying
2
Place the originals.
- Acceptable originals
8
- When placing an original on the glass
- When using the reversing automatic document feeder (op-
tional)
9
3
Select the copy modes
on the right)
- Use the colour mode selection key, the touch panel and the
digital keys.
10
- Any copy modes cannot be changed after the
is pressed (including the case when originals are divided into
11
multiple sets when fed).
- Selecting multiple copy modes may be restricted depending
on their combination.
12
4
Press the
on the right)
- When the reversing automatic document feeder is used and
the continuous feed mode is selected (
begins.
2-2
HOW TO MAKE COPIES
FUNCTION CLEAR key is pressed on the
Copying Procedure
Page 2-4
Page 2-6
Page 6-5
Page 2-9
Page 2-11
(
in the illustration on the page
.
Page 11-11, 11-12
START key
(
in the illustration on the page
.
Initial (default) settings
Full-colour mode
Reproduction ratio ........... 100%
Copy quantity ................ 1
Automatic paper selection
1-sided copies from 1-sided originals
Manual image density
Text/photo mode (original image type)
Sheet bypass ........ plain paper
Non-sort Non-staple mode
Continuous original feed mode (*2)
Page 2-10
START key
Page 6-2), copying
START key is pressed

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 310c

Table of Contents