Department Management - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

10. DEPARTMENT MANAGEMENT

You can administer the copy quantity of each department depending on your purposes by setting an
1
access code. You can also control the number of prints (when the optional printer controller is installed)
output for each department. Up to 120 codes can be set.
* When you want to set the access codes or reset the counters, the administrator password is needed.
2
1
Press the PROGRAM key to enter the programme
menu, and press the DEPT . MANAGEMENT key.
3
- If the key for the desired function is not shown, press the
Pre key or the Next key to switch the screen.
4
5
2 Key in the administra tor password (5 digits) or the
access code (5 digits).
- Registering the access code
6
- The setting and changing of the administrator password is
performed by your service technician (ask him/her for de-
7
tails).
- We recommend you to take a memo in order not to forget the
administrator password.
8
3
The department management menu appears.
- When the administrator password is entered in step 2:
9
10
- When the access code is entered in step 2:
11
12
6-22
USING THE SPECIAL FUNCTIONS
Page 6-25