Wi-Fi Configuration - Faema E71 E Engineer's Manual

1
1) The items are scrolled by pressing the icons
2) Press the icon .
3
To deactivate the function press RESET.
Wi-Fi Menu - Configure the following Wi-Fi parameters as
shown below:
- NETWORK - enter the name of the access point.
- SECURITY - indicate the type of wireless network security:
- KEY - enter the password to access a protected Wi-Fi
network (WPA or WEP)
- URL - enter listener.gruppocimbali.com.
- Port - enter 10000.
- CONNECT - to connect to the access point selected.
- RSSI - signal intensity:
- IP - displays the IP address assigned to the machine by
the wireless access point.
- RESET - To restore the parameters to the standard
parameters.
- MAC - represents the Mac address of the WiFi module
present in the machine. It is a parameter that is only
displayed, cannot be changed.
- fTX - reduces data transmission to the remote server:
- transmits all data daily at machine startup, faults/
washings per event;
- level 1 plus hourly counts;
- level 2 plus pings every 10 min. (default).
Position the cursor on the item CONNECT to manually
connect to the access point selected; if the configuration of
the WiFi module is correct, the icon
transmission of the data to the server:
WiFi configuration
2
Scroll through the items using the icons
.
4
Reset the parameters with the icon
of the standard data:
5
1) The items are scrolled by pressing the icons
2) Press the icons required to configure the parameters.
6
lights up during the
34 EN
.
- initialization
.