Table of Contents
Advertisement
grinder control.
1
Press the icon
Dose time variation relative to the MD3000 grinder/dispenser
To increase or decrease the measure-time operate as follows:
1) press the
icon from the main screen:
2) The following is displayed:
U S E R M E N U
D O S I N G
C O U N T E R S
M O D A L I T Y
3) press the DOSING item; the following is displayed:
D O S I N G
D O S E 1
D O S E 2
D O S E 3
4) select the measure to be modified; the following is
displayed:
C H A N G E D O S E 1
0 2 . 2 5
Change the value by the "+" and "-" icons; confirm the
entered value by the
leave it unchanged.
Grinder control parameters configuration
.
icon or press the
icon to
2
Example of information on the flows of each single
dispensing sent to the Plat-One platform via WIFI.
(A) GR1 single coffee,
(B) GR 3 double coffee,
(A/B) GR 2 central with one single coffee and one double,
(C) the filter holder is not used for special coffees.
The measure-number correspondence is the following:
DOSE 1 for the single measure
for the double measure
DOSE 2
for the continuous measure
* DOSE 3
Note: single-measure's
grinding time variation in user mode is ± 25
hundredths of second (0 ÷ 1/4 second).
Double-measure's
user mode is ± 50 hundredths of second (0 ÷ 1/2
second).
* Grinding in continuous mode, if equal to zero
(DOSE 3 = 0), can only be modified by the
technician.
33 EN
;
;
and continuous measure
grinding time variation in
Hide quick links:
Advertisement
Table of Contents
