Lights - Faema E71 E Engineer's Manual

7
In the next step, the display update begins. The screen
shown is displayed on all of the machine's touch screens.
9
Enter the standard information, update the machine data and reactivate
the resistance.
DISPLAY CALIBRATION
The calibration procedure can be performed at any time by starting the
machine with Dip 3 ON.
The following message appears on all the displays when turned on:
Using a pen hold down the centre of the cross; repeat the operation in all the
points where the cross appears.
Perform the calibration on all the displays or only on those where it is required.
At the end of the operation, turn off the machine and return the Dip 3 to OFF.
1
Press the icon .
UPDATE SOFTWARE
0
2
8
When the status indicator reaches 100% the update
is complete and the machine restarts automatically.
The following message appears when restarting:
Remove the USB Pen Drive.

Lights

This menu allows adjustment of the
machine lights. Specifically:
- rear panel
- groups light
Set the values using the "+" and "-" keys.
The changes will be applied after the
data entered is confirmed with the key
38 EN
UPDATE COMPLETED
REMOVE USB
.
.