Programming - Faema E71 E Engineer's Manual

1
Press the icon .
Control Time - display dispensing time:
YES/NO (from 1" to 60').
Unit of Temperature - can be set to:
°C, degrees centigrade/Celsius, or °F,
degrees Fahrenheit.
Unit of Pressure - can be set to bar
or psi.
Buzzer - enables/disables all acoustic
signals when keys are pressed or
messages are displayed: YES/NO.
Boiler Pressure - indicates the
pressure of the service-boiler; 0.6 to
1.6 bar (9 to 23 psi)
C u s t o m e r P r o g . - c u s t o m e r
programming: YES/NO.
Prog. Lock - block settings: YES/NO.
Saturation - Saturation YES/NO.
Enabling (YES) allows the duration of
the saturation phase to be programmed.
This system allows the barista to
saturate the coffee with water by
applying the standard pressure of the
pump for a programmable amount of
time, before the pre-infusion phase.

11. Programming

2
Press the icons to scroll through the entries.
Configuration of the parameter occurs by pressing the square of the parameter:
press the desired icon on the screen and confirm with
W e i g h t i n g s y s t e m - a l l o w s
management of the Acaia scales
for weighing the amount of coffee
dispensed: YES/NO.
Payment systems-When connected,
allows configuration of a payment
system.
Level Sensitivity - indicates the
degree of sensitivity of the level probe,
which then operates the filling of the
service-boiler with water. For safety
reasons, automatic level control of the
self-leveller service-boiler is disabled
when the service-boiler heating element
is turned off.
- Note: set a value of 1 if the machine
is installed with very conductive water.
Set a value of 3 if the water used is not
very conductive (very soft).
Data In/Out - Function which makes it
possible to transfer the programming
data from machine to USB key and
vice versa.
IN: transfer from USB to machine;
OUT: from machine to USB.
21 EN
.
Grinder Control-1
Grinder Control-2
The parameters that can be set are:
- enabled - MM1 - MM2
- Adjustment threshold - see
the section "Steps for Bluetooth
Coffee Machine-Grinder/Dispenser
Communication" in the following
pages.
Bluetooth - see section "Bluetooth
Connection" in the following pages.
Wi-Fi - see section "Wi-Fi Configuration"
in the following pages.
WiFi Menu - see the "WiFi Configuration
" paragraph on the following pages.