Changing The Roll Paper Size; Removing The Roll Paper Holder; Setting The Roll Paper Holder - Ricoh FW740 Operating Instructions Manual

Hide thumbs Also See for FW740:

Table of Contents

Maintaining Your Copier

Changing the Roll Paper Size

Change the size guides on the left and

right of the roll paper holder when

you load different sized paper rolls.

Important

❒ Always follow the instructions be-

low when adjusting the roll paper

holder. Do not force the roll paper

holder by pulling or sliding it

strongly. This could damage the

holder.

Removing the Roll Paper

Holder

Push the paper holder inwards,

and then pull it upwards to re-

move it.

Note

❒ The paper holder is attached

with magnet and a hook.

❒ The paper holder is on the right

in this illustration.

Insert the hook on the paper hold-

er into (A), and then insert the

protrusion into (B).

Note

❒ Make sure the protrusions are

firmly in the hole.

Match the paper size as same as

one shown in the windows .

Standard paper sizes that can be

used in this copier are shown be-

low.

Table of Contents