Table of Contents
Advertisement
Copying
Stamp position and original orientation
2
Note
r You cannot use the bypass tray
with this function.
r Only one message can be stamped
each time.
Reference
p.98 "Stamp Language"
p.98 "Stamp Position"
p.99 "Stamp Format"
A
Press [Edit/Stamp].
B
Press [Stamp].
60
All manuals and user guides at all-guides.com
GCSTMP5E
C
Press [Preset Stamp].
D
Select the desired message.
E
Press [All Pages] or [1st Page only] to
select the print page.
Note
r You can change the position,
size, and density of the stamp.
See p.60 "Changing the stamp
position, size and density".
F
After you specify all desired set-
tings, press [OK].
G
Press [OK].
H
Place your originals, and then
press the {Start} key.
Changing the stamp position, size and
density
A
Press [Change].
B
Select the position for print, size,
and density, and then press [OK].
User Stamp
Copies with the registered stamp.
Preparation
You have to register a user stamp
before using this function. See p.61
"To program the user stamp".
GCSTMP0E
Advertisement
Table of Contents
