Table of Contents
Advertisement
im Vertrieb von
Packaging for Shipment, Cont'd
3.
Bolt the clamshell to the enclosure with two bolts and flat
washers included in the return kit (figure B-3).
Figure B-3 — Attaching the clamshell
4.
Place the enclosure and clamshell rightside-up on a
horizontal surface. To protect the finish, place the
enclosure on a soft cloth or rubber mat.
www.camboard.de
B-4
HSA 822M • Packaging for Shipment
CAMBOARD Electronics
Tel. 07131 911201
Fax 07131 911203
5.
Install the rubber strips that protect the flanged edges of
the top of the surface enclosure (figure B-4).
Figure B-4 — Installing protective strips
6.
Insert the HSA 822M and the clamshell into one of the
foam shells (figure B-5). Either open end of the clamshell
and the open top panel will fit into the recesses in the
foam.
Figure B-5 — Installing the foam shell
ce-info@camboard.de
HSA 822M • Packaging for Shipment
B-5
Advertisement
Table of Contents
