Extron electronics HSA 822M User Manual page 24

Motorized hideaway surface access enclosure
Hide thumbs Also See for HSA 822M:
Table of Contents

Advertisement

im Vertrieb von
Reference Information
Specifications
Control/remote
Contact closure ..............
(1) 3.5 mm female captive screw connector, 10
pole
Contact closure/level pin configuration
Pin 1 = up, pin 2 = down, pin 3 = stop,
pin 5 = enable push operation, pin 6 = status up,
pin 7 = status down, pin 9 = status power,
pins 4, 8, and 10 = ground
General
Power ..............................
100 VAC to 240 VAC, 50/60 Hz, 25 watts,
internal, autoswitchable
Temperature/humidity .
Storage: -40 to +158°F (-40 to +70°C) /
10% to 90%, noncondensing
Operating: +32 to +122°F (0 to +50°C) /
10% to 90%, noncondensing
Rack mount ....................
No, but furniture mountable
Enclosure type ............... Metal
Enclosure approximate dimensions
Use the appropriate metal Extron routing template or refer to
CAUTION
the surface cutout dimensions here before cutting a hole in the
furniture or other surface. Pay special attention to the direction
the unit will face; the unit's AAP and connector access side is
underlined. Extron is not responsible for miscut mounting
holes.
Top plate (outer rim) ........................... 8.470" W x 8.750" D
Top plate (vertically lifting plate) ..... 6.220" W x 6.500" D
Surface cutout ...................................... 7.90" ±0.0325" W (AAP access from
Clamshell (figure A-1) ........................ A = 7.24" (18.39 cm)
www.camboard.de
A-2
HSA 822M • Reference Information
(21.51 cm W x 22.23 cm D)
(15.80 cm W x 16.51 cm D)
front and back) x 8.250" ±0.0325" D
(20.07 ±0.083 cm W x 20.96 ±0.083 cm D)
B = 8.25" (21.0 cm)
C = 10.98" (27.89 cm)
CAMBOARD Electronics
Product/shipping weight ......... 10.0 lbs (4.5 kg)/17 lbs (8 kg)
Listings ........................................ UL, CUL
Compliances ............................... CE
MTBF (stepper motor) ............... 100,000 cycles
Warranty ..................................... 3 years parts and labor
Tel. 07131 911201
Fax 07131 911203
A
B
Figure A-1 — Clamshell dimensions
Specifications are subject to change without notice.
ce-info@camboard.de
HSA 822M • Reference Information
C
A-3

Advertisement

Table of Contents
loading

Table of Contents