Table of Contents
Advertisement
im Vertrieb von
Reference Information, cont'd
Top Plate Dimensions
The preferred and recommended method for cutting the table is
to use the metal routing template (figure A-2 and chapter 2,
Installation) and a router. The template, part #70-191-01, is
available at no cost.
USER ACCESS
Figure A-2 — HSA 822 metal routing template
The HSA 822M mounts in exactly the same size hole as
the HSA 822 and uses the same metal mounting
template.
If you choose not to use Extron's metal routing template, the
cut-out template (figure A-3 on the next page) will help you
properly prepare the mounting surface. The cutout template is
not to scale and is for reference only. The surface cut-out area
dimensions for the template are marked in bold type.
The HSA 822M mounts in exactly the same size hole as
the HSA 822 and uses the same paper cut-out template.
For a full size paper template, visit the Extron Web site
(http://www.extron.com) or call the Extron S
Support Hotline.
www.camboard.de
A-6
HSA 822M • Reference Information
CAMBOARD Electronics
USER ACCESS
EXTRON ELECTRONICS
3
Sales & Technical
Tel. 07131 911201
Fax 07131 911203
HSA 822M cut-out template
Cut-Out Template for Extron's
HSA 822M
User Access (Connectors and AAP Openings)
8.470" (21.51 cm)
6.220" (15.80 cm)
7.900 0.0325"
(20.07 0.083 cm)
SURFACE CUT-OUT
AREA = 7.900 0.0325"
8.750"
(20.07 0.083 cm) x
(22.23 cm)
6.500"
(20.96 0.083 cm)
(16.51 cm)
+
+
Cut surface material
out along this line.
User Access (Connectors and AAP Openings)
TEMPLATE IS NOT FULL SIZE.
Figure A-3 — HSA 822M cut-out template
ce-info@camboard.de
HSA 822M • Reference Information
+
+
+
+
+
8.250 0.0325"
+
(1.3 cm)
Tilting Plate
Top Panel
Cut-Out Radius:
0.25"
(0.6 cm)
0.5"
A-7
Advertisement
Table of Contents
