Table of Contents
Advertisement
im Vertrieb von
Installation, cont'd
Bezels
The HSA 822M ships with RJ-45/RJ-11 connector bezel plug-ins
in a variety of colors and a black, blank bezel.
Bezel
To change to a different color RJ-45 connector
bezel or if an RJ-45 connector is not needed or
desired, replace the connector bezel plug-in on
the AAP/RJ-45 panel with a bezel of a different
color or a blank plug-in. See Replacing the Bezels
in chapter 3.
If no RJ-45 connector is desired, snap
the interior RJ-45 cable onto the rear of
the blank bezel plug-in (shown at
right) to hold it conveniently out of the
way. Retain the removed connector
bezel plug-in for any possible later
use.
www.camboard.de
2-16
HSA 822M • Installation
CAMBOARD Electronics
Blank Bezel
Plug-in in AAP
Panel
Tel. 07131 911201
Fax 07131 911203
HSA 822M
Chapter Three
Maintenance and Modifications
Removing and Replacing the Enclosure
Setting the Upper Limit Switch (Elevated Platform Height)
Setting the Lower Limit Switch (Lowered Platform Height)
Replacing the Control Board Assembly and Power Supply Assembly
ce-info@camboard.de
3
Replacing an AAP
Replacing the Bezels
Setting the Manual Release Switch
Safety Switch — Location Only
Advertisement
Table of Contents
