Scalance W Components For The Industrial Wireless Lan; Scalance W Devices - Siemens SIMATIC NET System Manual

Note
Requirement for connecting at the rear
Note that the connector on the rear of the PS598-1 can only be used if the power supply is
mounted on the SCALANCE XR-500M.
Note
Replacing the filter mat
To replace the filter pad use the material Viledon P 15/150 G2 EN 779. The dimensions of
the filter pad are 38 x 135 x 8 mm (H x W x D).
Article numbers
Device
SCALANCE PS598-1
4.6

SCALANCE W components for the Industrial Wireless LAN

4.6.1

SCALANCE W devices

Introduction
All SCALANCE W products were developed specially for industrial use. Thanks to the robust
housing and high reliability in data transmission, the devices are suitable for all sectors and
applications. With most of the devices, the power supply can also be via Power over
Ethernet. This allows these devices to be integrated in an existing infrastructure without
additional cabling. The accessories such as antennas, power supply units and cabling are
also part of this concept and produced to be suitable for industry. The exchangeable media
C-PLUG (Configuration Plug), KEY-PLUG and CLP (Configuration License PLUG) store
project engineering and configuration data which makes device replacement possible in a
short time without specially trained personnel. This minimizes downtimes and saves training
costs. Over and above this, the KEY-PLUG or CLP iFeatures activates further device
properties (known as "iFeatures").
Industrial Ethernet
System Manual, 09/2019, C79000-G8976-C242-10
4.6 SCALANCE W components for the Industrial Wireless LAN
Description
Power supply 300 W input:
85 to 264 V AC cold-device connector;
output: 24 V DC terminals or for direct
connection to SCALANCE XR-500
SCALANCE network components
Article number
6GK5598-1AA00-3AA0
203