Interfaces - Siemens SIMATIC NET System Manual

● Configuration with STEP 7 V 5.3 plus SP 1
● Web Based Management
● Command Line Interface / Telnet
● SNMP / SNMP-supported diagnostics
● SNTP
● Ring redundancy including RM functionality
● MRP interconnection
● Standby redundancy
● STP/RSTP (Spanning Tree Protocol/Rapid Spanning Tree Protocol) and RSTP+
● Passive listening
● Topology support (LLDP)
● Link aggregation (IEEE 802.3ad)
● VLAN (Virtual Local Area Network) port based
● IGMP Snooping/Querier (Internet Group Management Protocol)
● IEEE 802.1x (radius)
● PROFINET diagnostics
● All models are available in two variants: PROFINET and EtherNet/IP The mode can,
however, be switched over as required with both device variants.
● In the EtherNet/IP mode, the devices also have EtherNet/IP diagnostics.
4.5.14.3

Interfaces

Device Total num-
ber of avail-
able ports
XC206-2 (ST/BFOC)
XC206-2 (SC)
XC206-2SFP
XC206-2SFP G
XC206-2SFP EEC
XC206-2SFP G EEC
XC208
XC208G
XC208 EEC
XC208G EEC
Industrial Ethernet
System Manual, 09/2019, C79000-G8976-C242-10
Twisted pair
10/100 Mbps 10/100/1000
Mbps
8 6x RJ45
8 6x RJ45
8 6x RJ45
8 -
8 6x RJ45
8 -
8 8x RJ45
8 -
8 8x RJ45
8 -
4.5 SCALANCE X Industrial Ethernet Switches
Fiber-optic ca-
bles
100 Mbps
- 2x ST/BFOC
multimode
- 2x SC , multi-
2)
mode
- -
6x RJ45 -
- -
6x RJ45 -
- -
8x RJ45 -
- -
8x RJ45 -
SCALANCE network components
SFP slots Combo ports
, -
2)
-
2x
SFP991/SFP992
2x SFP992
2x
SFP991/SFP992
2x SFP992
-
-
-
-
-
-
-
-
-
-
-
-
-
-
163