Features And Functions - Siemens SIMATIC NET System Manual

SCALANCE network components
4.5 SCALANCE X Industrial Ethernet Switches
4.5.21.2

Features and functions

Features
The individual devices have the characteristics shown in the following table:
Modular design
Combo ports
Gigabit Ethernet
10 Gigabit Ethernet
PoE Power over Ethernet
Diagnostics LED
Redundant power supply
On site display (Set button)
C-PLUG slot
● Suitable / available or according to the specified standard
Functions
All devices have the following functions:
● Configuration with the Primary Setup Tool (PST) V3 or higher;
to use the Primary Setup Tool to assign the IP address, the switches must be accessible
via Ethernet.
● Configuration of the IP address with DHCP
● Configuration with STEP 7
● Command Line Interface
● Web Based Management
● SNMP / SNMP-supported diagnostics
● SNTP
● Ring redundancy including RM functionality
● Standby redundancy
● MRP interconnection
● STP/RSTP (Spanning Tree Protocol/Rapid Spanning Tree Protocol) as well as RSTP+
● Passive Listening
● Topology support (LLDP)
● VLAN (Virtual Local Area Network)
● GVRP (Generic VLAN Registration Protocol)
● IGMP snooping/querier (Internet Group Management Protocol)
198
XR552-12M
XR528-5M
●
-
●
●
●
●
●
●
●
System Manual, 09/2019, C79000-G8976-C242-10
XR524-8C
XR526-8C
-
●
●
●
-
●
●
●
●
Industrial Ethernet