Sinec Nms - Siemens SIMATIC NET System Manual

This includes the following devices:
● CP 443-1 (6GK7 443-1EX10 and 6GK7 443-1EX11)
Note
The DLC protocol is not supported in 64-bit operating systems. The DLC protocol is not
available either in the setup or during operation of the Primary Setup Tool.
Note
Depending of the operating system you are using, remember the following if you want to
use the DLC protocol:
• Windows 7 Professional / Ultimate
• Windows XP Professional
Note
You will find more detailed information on the Primary Setup Tool and on downloading
the software at PST (https://support.industry.siemens.com/cs/ww/en/view/19440762).
4.9.2

SINEC NMS

Description
The network management system SINEC NMS is a software for central monitoring and
management of industrial networks with up to 12500 nodes. The distributed approach of
SINEC NMS allows a subsequent expansion of the network infrastructures. The network
management system SINEC NMS is subdivided into two levels:
● Control
Monitoring and administering the entire network
● Operation
Monitoring and administering a subnetwork
Industrial Ethernet
System Manual, 09/2019, C79000-G8976-C242-10
The DLC protocol is not included in Windows, but it can be installed and enabled
during installation of the PST.
Hardware requirements at least: Clock frequency 1 GHz / 1 GB RAM / screen
resolution 1024 x 768 / color quality 16 bit
The DLC protocol is not included in Windows, but it can be installed and enabled
during installation of the PST.
Hardware requirements at least: Clock frequency 600 MHz / 512 MB RAM / screen
resolution 1024 x 768 / color quality 16 bit
SCALANCE network components
4.9 Network management software
277