Communications Processors Sinaut St7 For Simatic S7-300 - Siemens SIMATIC NET System Manual

8.3

Communications processors SINAUT ST7 for SIMATIC S7-300

Description
Figure 8-4
The SINAUT ST7 TIM communication modules allow S7-300 stations SINAUT
communication via telecommunications networks or IP-based networks. The devices have a
rugged plastic housing with IP20 degree of protection for installation on an S7-300 standard
rail.
Features
RS 232 connections
for external data trans-
fer
Connections for Indus-
trial Ethernet
External power supply
24 V DC
Number of active con-
nections multiprotocol
mode
No. of TIMs per S7-
300
C-PLUG
● Suitable / available or according to the specified standard.
Depending on the connection resources of the CPU
1)
Industrial Ethernet
System Manual, 09/2019, C79000-G8976-C242-10
8.3 Communications processors SINAUT ST7 for SIMATIC S7-300
SINAUT TIM 3V-IE
TIM 3V-IE TIM 3V-IE Ad-
vanced
1x D-sub 9-pin 1x D-sub 9-pin
1x RJ45 1x RJ45
2-pin plug-in 2-pin plug-in
terminal strip terminal strip
12
1 Multiple
-
Communications processors for SIMATIC S7
TIM 3V-IE DNP3
1x D-sub 9-pin
1x RJ45
2-pin plug-in
terminal strip
24 -
1
1)
- -
TIM 4R-IE TIM 4R-IE DNP3
2x D-sub 9-pin 2x D-sub 9-pin
2x RJ45 2x RJ45
2-pin plug-in 2-pin plug-in
terminal strip terminal strip
128
Multiple
1)
Optional Optional
-
1
317