Siemens SIMATIC NET System Manual page 306

Communications processors for PCs
7.5 CP 1628
7.5 CP 1628
Description
Figure 7-6
The CP 1628 is a PCI Express card with its own microprocessor and integrated 2-port switch
for connecting PCs and SIMATIC PGs/PCs to Industrial Ethernet. PNIO is not supported by
this module.
Features
Required slot on the PC
Number and type of the interfaces for Industrial Ethernet
Gigabit Ethernet
Own microprocessor
Optional external power supply 12 ... 24 VDC
Functions
● Up to 512 connections can be configured at one time
● Transmission rates 10/100/1000 Mbit/s (half/full duplex)
● Autosensing, autocrossover and autonegotiation
● Time-of-day synchronization
● DCP
● Network management and diagnostics using SNMP
306
CP 1628
CP 1628
PCI Express x1
2x RJ45
System Manual, 09/2019, C79000-G8976-C242-10
●
●
●
Industrial Ethernet