Siemens SIMATIC NET System Manual page 34

Industrial ethernet / profinet industrial ethernet
Hide thumbs Also See for SIMATIC NET:
Table of Contents

Advertisement

Basics of communication with Industrial Ethernet
1.3 Technologies of Industrial Ethernet
ICMP
Ports
Router discovery
Quality of Service
Types of frame
Identification of DHCPv6 cli-
ents/server
34
IPv4
ICMP
UDP
RIP: UDP 520
optional
Type of Service (ToS) for
prioritization
Broadcast, multicast,
unicast, anycast
Client ID:
MAC address
IPv6
ICMPv6
Router Solicitation (ICMPv6 type 133)
Sent by a client to localize servers.
Router Advertisement Messages (ICMPv6 type 134)
Sent by a server as response to a Solicit message to indicate
availability.
Neighbor Solicitation Messages (ICMPv6 type 135)
Node send Neighbor Solicitation messages to obtain the data
link layer address of a neighbor node. Neighbor Solicitation
messages are used to establish whether a neighbor node is
still reachable via a buffered data link layer address. Neigh-
bor Solicitation messages are also used to recognize dupli-
cate addresses.
Neighbor Advertisement Messages (ICMPv6 type 136)
A node sends Neighbor Advertisement messages as a reac-
tion to a Neighbor Solicitation message. The node can also
send unsolicited Neighbor Advertisement messages, to make
a change in the data link layer address known.
Redirect Messages (ICMPv6 type 137)
Use Redirect messages to inform hosts of a better first hop to
a destination or to inform them that the destination is located
on the same link.
DHCP, ports client 546 & server 547
RIPng: 521
mandatory
When router discovery is used in addition, the node is in-
formed of the following
further IPv6 addresses
router addresses
further configuration parameters e.g. via DHCP
The prioritization is specified in the header field "Traffic
Class".
Multicast, unicast, anycast
DUID + IAID(s) = exactly one interface of the host
DUID = DHCP unique identifier
Identifies server and clients uniquely and should not change.
No modification when replacing network components.
IAID = Identity Association Identifier
at least one per interface is generated by the client and re-
mains unchanged when the DHCP client restarts
Three methods of obtaining the DUID
DUID-LLT
DUID-EN
DUID-LL
System Manual, 09/2019, C79000-G8976-C242-10
Industrial Ethernet

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents